WoodenCrew AirSeat Cushion Instruction
Thank You for choosing our Air Seat Cushion.
How to Inflate the AirSeat![WoodenCrew]()
-
Find the valve marked “Deflate.”
It has two layers — the first valve is for quick inflating by mouth, the second is for quick deflation. -
Open only the first valve for mouth inflation.
Gently lift the small top cap — this is the one used to blow air in.
⚠️ Do not open the second valve behind it. -
Blow air into the first valve.
Inflate by mouth until the cushion reaches your desired firmness. -
Close the first valve tightly.
Make sure it’s fully sealed to keep the air inside.
Adjusting the pillow pressure
If you need a firmer pillow or don't want to inflate it by mouth, use the built-in pump:
-
Check the deflating valves
Before inflating, make sure both deflating valves are fully closed. This prevents air leakage. -
Open the inflation valve
Locate the valve at the back of the air cell and twist it open. -
Confirm it stays open
Ensure the valve is not accidentally closed. -
Inflate the cushion
Press repeatedly on the built-in pump cell until the cushion is firm enough. This usually takes under a minute. -
Seal the valve
Close the rear inflation valve tightly once you’re done. -
Important caution
Do not press the small red inner valve inside the rear inflation system. It is for slow deflation only.
Deflating the Cushion
-
Open both deflating valves
Turn the two side deflating valves to release the air. The cushion will flatten quickly. -
Fold and pack
Once all the air is out, fold the cushion neatly and store it in its case.
Feel free to contact us if you have any questions or need further assistance.
Safe travels!
Warm regards,
WoodenCrew
